A wall mount is the least intrusive way to add a fire. The Eclipse hangs on two brackets, takes four inches of depth, and leaves the floor entirely free underneath.
Mirrored Electric Fireplace Wall Mount at a Glance
- Hangs on two brackets, no floor footprint
- Full-width mirror face with a linear fire
- Crystal ember bed in a shallow trough
- 5,200 BTU heater with thermostat and remote
- Fits a flat wall or a chimney breast
- Plug-in or hardwired installation
Who it suits: a flat, a rented home, a chimney breast that is out of use, or any room where floor space is the constraint.
A mirror panel that happens to be a fire
The mirror face runs to the edges of the panel, so from a distance it reads as a mirror with a fire in it rather than a fire with a frame around it.
Linear flames run the full width and the crystal ember bed sits in a shallow trough below them. It is a modern composition: no logs, no grate, no fireback.
Because it hangs, the fire sits at eye level rather than knee level. That changes how much light reaches the room, and in a small space it is the difference between an accent and a feature.
Heating performance and room coverage
Heat comes from a 1,500W element rated at 5,200 BTU. We use the same heater across the range because a standard 15 amp circuit will not carry more, whatever a box says.
In practice a mirrored electric fireplace wall mount holds 400 to 600 square feet comfortably, and helps in a room up to about 1,000 square feet when the doors are shut and the walls are insulated. Placement matters less than most buyers expect, provided the outlet is not blocked, and the thermostat does the rest of the work.
The flame runs independently of the heater. Turn the heat off and the fire becomes lighting, which is how most people use it for eight months of the year.
The most common mistake with a mirrored electric fireplace wall mount is buying it for the whole floor plan rather than the room you sit in. Match the unit to the room and the thermostat will cycle calmly instead of running flat out all evening.
Specifications and delivery
| Spec | Detail |
|---|---|
| Model | EP-MIRROR-ECLIPSE |
| Type | Wall-mounted mirror panel fire |
| Depth | 4 inch |
| Flame | Linear LED, crystal ember bed |
| Heat output | 5,200 BTU / 1,500W |
| Mounting | Two brackets, template supplied |
| Power | Plug-in or hardwired 120V |
| Clearance | 20cm above, 30cm below |
| Weight | 19kg |
| Sizes | 42, 50 and 60 inch front width |
| Price | From $529 |
| Delivery | 2–5 business days, flat $50 under $1,000, free over $1,000 |
We check the flame, thermostat, cord and plug before dispatch, then ship it tracked.
Placement and clearances
Measure the wall you intend to use, then subtract 20cm so the unit does not crowd a door frame or a radiator. That figure decides which width you can fit.
Leave 25cm above the unit and 90cm clear in front. A sofa pushed against the glass traps warm air and trips the cut-off within twenty minutes.
Think about the socket before you commit. A mirrored electric fireplace wall mount needs a standard outlet within 72 inches, and the cord exits on the right of the body. If the nearest socket is on the wrong side, plan a lead or move the socket rather than stretching a cable across a walkway.
Finally, look at what the fire will reflect. Glass facing a television shows the screen, which is distracting. A wall facing a window reflects daylight in the afternoon, which most people like.
Running costs
Full heat draws 1.5 kWh an hour. At the US average of about 15 cents per kWh, that is roughly 22 to 23 cents an hour.
On the thermostat, a typical evening lands nearer 15 to 17 cents, because the element cycles rather than running continuously. Flame-only mode draws a few watts and costs pennies.
Compare that with a gas fire, which costs more per hour to run in most US markets once standing charges are counted, or with solid fuel, which costs more again and takes an evening to light properly.
The Department of Energy explains how resistance heating is priced per kilowatt hour. Ten minutes there will save you guessing at running costs.
Installation without a trade
There is no flue, no gas and no vent, so a standard install needs no qualified fitter and no inspection afterwards.
- Measure both corner returns and check the unit clears every skirting board and window return before you unpack it.
- Move it into position with two people. Corner units are awkward rather than heavy, and one person will inevitably twist the frame trying to lift it alone.
- Level the feet against both walls. A corner out of square is normal; adjustable feet take up 12mm, which covers almost every room.
- Route the cord to the nearest outlet, keeping it behind the base rather than across the floor where it collects dust and gets kicked.
- Run the flame for ten minutes, then heat on low for five, then full output. If anything rattles at full heat, stop and call us.
The whole job takes about thirty minutes. If you are wall-mounting rather than placing a freestanding unit, add twenty minutes for the brackets.
Choosing the right size
We stock this mirrored electric fireplace wall mount in 42 inch, 50 inch, 60 inch. All options share the same body height, so the decision is about width rather than height.
Start from the wall. If the usable span is under 45 inches, choose a smaller body; a wide unit in a short wall crowds the doorway and looks wedged in rather than fitted.
Then look at the room. A 400 square foot room suits any size, while a 600 square foot open-plan space benefits from the wider option, because heat leaves a wider outlet and the flame fills more of the corner.
If you are between sizes, go up. Buyers who regret a corner fireplace almost always regret buying small.
Care and safety
Wipe the glass with a non-ammonia cleaner and a microfibre cloth, only when the unit is cool. Hot glass and cold cleaner is how crazing starts, and no polish fixes it afterwards.
Dust the surround monthly. Mirror and metal both show fingerprints, so keep a dry microfibre cloth nearby and wipe the leading edges rather than the whole panel.
Vacuum the intake grille every few weeks and keep fabric away from it. The overheat cut-off will protect the unit, but it cannot protect your evening.
Check the plug and cord once a year for warmth or discolouration. A media unit is often plugged in behind furniture, where a loose plug goes unnoticed for a decade.
What ownership looks like in year three
No fuel to buy, no ash to carry, no flue to sweep. The running cost is electricity and the maintenance is dust and glass.
The LED flame is rated for tens of thousands of hours, which is years of daily evening use. If an element fails inside the 12 month warranty we replace the unit rather than posting you a part and a diagram.
Returns run 30 days on unopened units, so if the corner turns out to be the wrong corner, you have time. Keep the carton for a week after delivery and photograph the glass before you recycle the packaging.
Three mistakes to avoid
Buying for the whole floor plan. A mirrored electric fireplace wall mount heats 400 to 600 square feet in practice. Buy it for a bigger space and you will spend the winter disappointed by arithmetic rather than by the product.
Sharing the circuit. At full heat these draw 12.5 amps. A kettle or a second heater on the same circuit will trip the breaker, and the fireplace will get the blame.
Ignoring the wall itself. Old walls are rarely plumb, and a unit forced against one will show a gap along its whole length for as long as you own it. Adjust the feet, pack the gap, and check with a spirit level before you throw the packaging away.
Hanging it straight
Use the paper template, mark the bracket centres, and check both marks with a spirit level before drilling. A 60-inch mirror panel that sits 5mm out of level is the first thing anyone notices in the room.
Fix into studs or masonry. A mirror panel is heavier than a picture frame and the glass does not forgive a fall.
Lighting a dark wall
This mirrored electric fireplace wall mount is most effective on a dark wall, where the mirror reads as a window and the flame becomes the only warm light in the room. On a white wall it almost disappears when the fire is off.
If you want the panel visible during the day as well, choose a dark wall. If you want it to vanish, choose pale.
Renting, and leaving no trace
Two bracket holes and a plug socket. That is the entire footprint of a mirrored electric fireplace wall mount, which makes it the most renter-friendly fire in the range.
Keep the template and the fixings when you move. The next tenant will not have them, and the panel is not heavy enough to justify a professional install.
Heat, glass and the gap that matters
A mirrored electric fireplace wall mount has to keep warm air off its own face. The 20cm gap above the panel is the number that does that job, and reducing it to fit under a picture rail is the one installation mistake worth avoiding.
If the space is tight, move the picture rail rather than the fire. A mirrored electric fireplace wall mount that has run hot shows a tide line across the top of the glass within two seasons.
Below the panel, 30cm is enough for a sofa back or a console. Nothing else should sit in front of the glass, because the reflection is half the product.
Delivery, returns and the two things people ask about
Everything ships from our own yard, tracked, in 2 to 5 business days. Shipping is a flat $50 under $1,000 and free over $1,000, with a $150 minimum order. We will not promise a delivery window we cannot hold, and if a carrier loses a unit we replace it rather than sending you to a claims form.
Returns run 30 days on unopened units. Keep the carton for a week after delivery, because a transit scuff is far easier to resolve while the packaging still exists. Photograph the glass in daylight before you recycle anything.
Two questions come up on almost every order. The first is whether the heater can run without the flame, and it cannot: the flame is the light source for the fire and it stays on whenever heat is on. The second is whether the flame can run without the heater, and it can, all year, which is how most owners use these units from spring onwards.
How it compares to the rest of the range
If you need a console, the mirrored electric fireplace tv stand carries a screen. In a period room, the glass mirror electric fireplace uses antiqued glass that suits old walls.
The Ember Peak standard
Every fire we ship is bench-tested before it leaves the yard. We inspect the flame with the heater off, check the thermostat, and test the cord and plug, because a fireplace that arrives with a rattle is one you resent for years.
Delivery arrives tracked within 2 to 5 business days. Shipping is a flat $50 under $1,000 and free over $1,000, with a $150 minimum order. Anything unclear before or after the sale reaches a human on the contact page, and we will tell you when a different model suits your room better.
Compare the full range on the mirrored electric fireplaces page, or read our sizing guide before you commit.
Common questions
Does it need an electrician?
No, it ships with a plug. Hardwiring is optional.
How much does it weigh?
19kg on the 60-inch version.
Can it hang above a sofa?
Yes, with 30cm clear below and nothing stacked in front.
Is the mirror face glass?
Yes, 4mm mirror glass.
Can it be recessed into a wall?
No. It is a surface-mounted panel.
What sizes does it come in?
We stock it in 42 inch, 50 inch, 60 inch. All sizes share the same body height, so choosing one is a decision about width.
Does it include a remote and timer?
Yes. The box includes a remote, an adjustable thermostat, a 1–9 hour timer and the fixings.
If you are replacing an open fire or a gas fire that no longer works, this mirrored electric fireplace wall mount is the least disruptive route back to a working hearth. Nothing structural changes, nothing needs sweeping, and the whole job takes under an hour.
Every unit ships from our own yard rather than a third-party warehouse, which is why we can tell you honestly what fits your corner and what does not. We would rather talk you out of the wrong size than sell you one and post you a returns label.
Order the Eclipse Mirrored Electric Fireplace Wall Mount today. It ships in 2 to 5 business days with tracking, and orders over $1,000 ship free.
Reviews
There are no reviews yet.