An open firebox looks unfinished. A glass screen gives it a front, keeps the media in place and stops the flame reading as a strip light in a hole.
Electric Fireplace Glass Screen at a Glance
- 5mm tempered glass
- Polished edges on all four sides
- Clear, low-iron glass for true flame colour
- Standard sizes to fit common openings
- Fixing clips included
- Wipe-clean surface
Who it suits: a firebox with no front, or a replacement for a broken panel.
Glass, and the two things that matter
It has to be tempered, not ordinary glass. A heater box runs warm at the top and cold at the bottom, and ordinary glass will not survive that for long.
The edges have to be polished. A raw-cut edge is a cut waiting to happen, and it also catches the light badly, which shows every flaw in the cut.
Five millimetres is the right thickness for a firebox screen: thick enough to sit rigid, thin enough that the flame still reads clearly through it.
Compatibility and what it fits
This electric fireplace glass screen fits every firebox we sell. If you bought a fire elsewhere, the two measurements that decide compatibility are the ember bed length and the clear height above it, not the width of the unit on the box.
Measure the bed rather than the fire. A 60-inch fire usually has a 52-inch bed once the side trims are counted, and buying to the fire width leaves you short at both ends. That single mistake is behind most of the returns we see on a electric fireplace glass screen.
If you are unsure, photograph the opening with a tape measure visible in the frame and send it to us. We would rather answer that question before you order than process a return afterwards.
Nothing here needs an electrician, a gas engineer or a builder. That is the advantage of a electric fireplace glass screen: it changes how a fire looks and works without changing the fire itself. If the firebox is sound, this is the sensible place to spend money.
Specifications, stock and delivery
| Spec | Detail |
|---|---|
| Model | EP-ACC-GLASS |
| Material | Tempered glass, low iron |
| Thickness | 5mm |
| Edges | Polished, all four sides |
| Sizes | 24, 30, 36 inch |
| Fixings | Clips included |
| Tolerance | ±2mm on cut sizes |
| Clarity | Low iron, minimal green tint |
| Warranty | 12 months |
| Care | Non-ammonia cleaner |
| Price | From $79 |
| Delivery | 2–5 business days, flat $50 under $1,000, free over $1,000 |
We check every item before dispatch and ship it tracked.
Fitting it in an afternoon
Unplug the fire and let it cool completely before you touch anything inside it. Even a warm firebox is unpleasant to work in, and glass that has been running is more fragile than glass at room temperature.
- Photograph the existing setup before you change it. You will want the reference if you decide to revert.
- Remove the glass or top panel, put the screws in a bowl, and keep the bowl where you can see it.
- Lift out the old media or the old part, and vacuum the tray while you have access to it.
- Fit the new item in a single layer or a single pass, checking it sits flat rather than proud.
- Reassemble, plug in, and run the flame for ten minutes before you judge the result.
The last step matters. A electric fireplace glass screen that looks wrong under a work lamp usually looks right under its own glow, and the reverse is also true. Judge it in the evening, in the room, with the lamp off.
Care that keeps it looking new
Dust is the enemy of every fireplace accessory, because it settles in texture and then catches the light. A soft brush once a month does more than any amount of polish.
Keep solvents away from acrylics, coatings and mirror finishes. Warm water and a drop of washing-up liquid handles almost everything in this range, and it is the only thing that is safe on all of it.
Store spare media in the packaging it arrived in rather than a drawer. Crystals scratch each other, stones chip, and log shells lose their finish if they rattle around loose.
Check the item once a year for warping or discolouration. A electric fireplace glass screen is cheap to replace and expensive to ignore, because a faded ember bed makes an entire fireplace look old.
Why accessories beat a new fireplace
A replacement fire costs several hundred dollars and a day of fitting. The same visual change usually comes from media, a shelf or a screen, which costs a fraction and takes an afternoon at most.
The strongest case is resale. A tired fire with a fresh ember bed and clean glass photographs like a newer one, and buyers judge fireplaces on what they can see in a listing.
The second case is renting. A electric fireplace glass screen moves with you; a built-in fire does not.
The third is that accessories are the only part of a fireplace you can change without touching anything structural. No wiring, no plaster, no tradesman, and nothing that needs undoing if you change your mind.
What accessories cannot do is change the heat output, the flame mechanism or the size of the firebox. If any of those are the actual problem, you need a different fire rather than a different bed.
Before you order
Check the model number on the data plate of your fire, usually inside the glass door or on the back panel, and compare it with the compatibility list in the specification table. If the plate is missing, photograph the firebox interior with a tape measure visible and send it to us.
Order one size larger than you think you need. A electric fireplace glass screen that is exactly the right size leaves nothing spare for the front edge, and the front edge is the part that gets knocked.
Think about the season as well. Media and screens are bought in autumn, when the fire starts being used, and that is also when stock moves fastest. We hold our own stock, so the estimate on this page is real rather than a supplier guess.
If you are buying this electric fireplace glass screen alongside a new fire, order both at once. They ship together, the delivery is free over $1,000, and everything arrives in the same window rather than across two weeks.
What to check when it arrives
Open the box in daylight and check the item against the photographs before you fit anything. Transit damage is rare but it is easy to resolve within a week and impossible to resolve in three months.
For a electric fireplace glass screen that arrives in pieces, count them against the contents list. A missing clip is a two-minute phone call before fitting and a wasted afternoon afterwards.
Keep the packaging for a week. It is the difference between a straightforward replacement and an argument about how an item was damaged.
Then fit it, run the fire for ten minutes, and look at the result from the doorway rather than from a metre away. That is the distance everyone else will see it from.
If the item sits in a fireplace that runs most evenings, expect to revisit it once a year rather than once a decade. Accessories take more abuse than they look like they do, and a small replacement in year four is normal rather than a fault.
Make a note of the fitting date inside the box lid and keep the box. When you come to replace the item in three or four years, the date and the model number are both there, and reordering takes a minute rather than an evening of measuring.
The Department of Energy sets out how electric heating is measured and priced, which is worth knowing before you spend anything on accessories for a heater.
Measuring for a screen
Measure the opening at three points across the width and at three points down the height, then use the smallest of each. Openings are rarely square, and glass does not forgive.
Allow 2mm clearance on each side for the clips. A screen cut to exact size will not fit once the clips are in.
Low iron glass, and why it matters
Ordinary glass has a green tint that shifts the colour of the flame toward yellow. Low-iron glass is almost colourless, so the orange stays orange.
Hold a panel against a white sheet before fitting it. If it looks green at the edge, it will tint the fire.
Cleaning without crazing
Non-ammonia cleaner, a microfibre cloth and a cool panel. Ammonia attacks some coatings and heat accelerates it.
Never spray directly onto the glass. Spray the cloth, wipe, then buff with a dry section.
Screen, guard and the difference
A screen is a front panel, not a safety guard. It keeps media in, stops dust settling on the ember bed and makes an open firebox look finished. It is not there to stop a child touching glass, because the glass is not hot to begin with.
That distinction matters when you are buying. An electric fireplace glass screen should be chosen for clarity and edge finish, not for impact resistance.
What you want is low-iron glass, polished on all four edges, five millimetres thick. Anything thicker dims the flame and adds weight the clips were not designed for.
Fitting a screen without cracking it
Tempered glass cannot be cut or drilled, so the screen has to be made to size before it is tempered. That is why we supply standard sizes rather than a cut-to-order service, and why the measurements need to be right first time.
Fit the clips loosely, seat the glass, then tighten in sequence from opposite corners. Tightening one clip fully before the others is how panels chip at the edge.
Leave a 2mm gap all round. Glass expands with warmth, and a panel cut to the exact opening will eventually bind and crack.
Clarity, colour and the flame behind the glass
Glass is a filter, and every filter changes colour. Standard glass shifts a flame toward yellow-green; low-iron glass leaves it alone. In a fire where the whole appeal is a warm orange, that difference is visible from across the room.
Thickness matters for a different reason. Five millimetres reads as a window; eight millimetres starts to dim the flame and adds weight to clips that were designed for something lighter.
An electric fireplace glass screen should disappear. If you notice the glass before you notice the fire, it is the wrong specification.
How it compares to the rest of the range
If the glass is fine but hazy, the glass care kit is the cheaper answer. If the fire sits in an oversized opening, the filler panel kit closes the gap.
The Ember Peak standard
Accessories are where most fireplace retailers stop caring. We do not, because a tired ember bed undoes the impression of a well-made fire faster than almost anything else.
Delivery arrives tracked within 2 to 5 business days. Shipping is a flat $50 under $1,000 and free over $1,000, with a $150 minimum order. Anything unclear before or after the sale reaches a human on the contact page.
Compare the full accessory range on the electric fireplace accessories page, or read our sizing guide if you are still choosing the fire itself.
Common questions
Is it safety glass?
Yes, tempered.
Can you cut it to size?
We supply standard sizes. Tempered glass cannot be cut after manufacture.
Will it fit my opening?
Measure the smallest width and height, then choose the nearest standard size.
Does it reduce heat?
Slightly, but the fire’s heater is independent and unaffected.
How do I clean it?
Non-ammonia cleaner on a cloth, cool glass only.
Is it in stock?
Yes. We hold stock of this item in our own warehouse and ship it tracked within 2 to 5 business days.
Can I return it?
Yes, within 30 days on unopened items. Open media packs cannot be returned for hygiene reasons, so check the size before you order.
Order the Tempered Glass Screen Panel today. It ships in 2 to 5 business days with tracking, and orders over $1,000 ship free.
Reviews
There are no reviews yet.