Not every fire needs to heat. A flame-only insert draws a few watts, plugs into any socket, and gives a room the focal point of a fire without adding warmth to a summer evening.
Electric Fireplace Insert With No Heat at a Glance
- Flame without heat, a few watts
- Plugs into any 120V socket
- No overload on existing circuits
- Fits 30, 36 and 42 inch openings
- Remote control and timer
- Ideal for warm climates and rentals
Who it suits: a warm room, a rental, or a summer house where heat would be a nuisance.
Who buys a flame-only insert
People in warm climates. People with underfloor heating who want the look and not the kilowatts. Landlords fitting a feature that cannot overload a circuit. And anyone who simply prefers a fire without a heater running.
It also suits a room where the heating is already right and a 5,200 BTU element would push it over. The fire becomes lighting, which is how most owners use a fire for eight months of the year anyway.
Running cost is a few cents an evening, and there is no thermostat to set because there is no heat to control.
Heating performance and room coverage
The element runs at 1,500W and gives 5,200 BTU, cycling on a thermostat rather than sitting at a fixed output. Outside, expect it to run longer than it would indoors, which is honest rather than faulty.
In practice a electric fireplace insert with no heat holds 400 to 600 square feet comfortably, and helps in a room up to about 1,000 square feet when the doors are shut and the walls are insulated. Placement matters less than most buyers expect, provided the outlet is not blocked, and the thermostat does the rest of the work.
The flame runs independently of the heater. Turn the heat off and the fire becomes lighting, which is how most people use it for eight months of the year.
The most common mistake with a electric fireplace insert with no heat is buying it for the whole floor plan rather than the room you sit in. Match the unit to the room and the thermostat will cycle calmly instead of running flat out all evening.
Specifications and delivery
| Spec | Detail |
|---|---|
| Model | EP-INS-LARKIN |
| Type | Flame-only insert |
| Opening fit | 30, 36 or 42 inch |
| Depth required | 7 inch |
| Heat output | None |
| Flame | LED, 3 brightness levels |
| Controls | Remote, panel, timer |
| Media | Log bed with ember glow |
| Cord | 72-inch, 120V plug |
| Warranty | 12 months |
| Price | From $329 |
| Delivery | 2–5 business days, flat $50 under $1,000, free over $1,000 |
We check the flame, thermostat, cord and plug before dispatch, then ship it tracked.
Where it goes outdoors
Under a roof, facing the seating. That is the rule that decides whether an outdoor fire gets used or gets ruined. A pergola, a porch ceiling, a balcony above or a carport all count. Open sky does not.
Wind matters more than temperature. Place the unit so its outlet runs across the seating rather than into the prevailing breeze, and put a screen, a planter or a wall on the windward side if you can. A 5,200 BTU fire in a breeze loses most of its output.
Keep 20cm above and 30cm below the unit, and keep anything flammable clear. A __KW__ near a stack of cushions or a folded parasol is asking for trouble, and outdoors people store things in exactly those places.
Finally, site it near a weatherproof socket with an RCD or GFCI on the circuit. An extension lead across wet paving is the one genuine hazard in this category, and an outdoor socket costs less than the fire.
Running costs outdoors
Full heat draws 1.5 kWh an hour. At the US average of about 15 cents per kWh, that is roughly 22 to 23 cents an hour.
Compare that with a gas patio heater, where a 15kg cylinder lasts around ten hours and heats a radius whether or not anyone is sitting in it. Running one electric fire over one seating group is cheaper as well as more targeted.
Flame-only mode draws a few watts, so a summer evening of light costs pennies. Most owners run it that way from May to September and use the heat for the shoulder months only.
The Department of Energy explains how resistance heating is priced per kilowatt hour. Ten minutes there will save you guessing at running costs.
Installation without a trade
There is no flue, no gas and no vent, so a standard install needs no qualified fitter and no inspection afterwards.
- Measure both corner returns and check the unit clears every skirting board and window return before you unpack it.
- Move it into position with two people. Corner units are awkward rather than heavy, and one person will inevitably twist the frame trying to lift it alone.
- Level the feet against both walls. A corner out of square is normal; adjustable feet take up 12mm, which covers almost every room.
- Route the cord to the nearest outlet, keeping it behind the base rather than across the floor where it collects dust and gets kicked.
- Run the flame for ten minutes, then heat on low for five, then full output. If anything rattles at full heat, stop and call us.
The whole job takes about thirty minutes. If you are wall-mounting rather than placing a freestanding unit, add twenty minutes for the brackets.
Choosing the right size
We stock this electric fireplace insert with no heat in 30 inch, 36 inch, 42 inch. All options share the same body height, so the decision is about width rather than height.
Start from the wall. If the usable span is under 45 inches, choose a smaller body; a wide unit in a short wall crowds the doorway and looks wedged in rather than fitted.
Then look at the room. A 400 square foot room suits any size, while a 600 square foot open-plan space benefits from the wider option, because heat leaves a wider outlet and the flame fills more of the corner.
If you are between sizes, go up. Buyers who regret a corner fireplace almost always regret buying small.
Care and safety
Wipe the glass with a non-ammonia cleaner and a microfibre cloth, only when the unit is cool. Hot glass and cold cleaner is how crazing starts, and no polish fixes it afterwards. It is the only maintenance a __KW__ really needs.
Dust the frame monthly. Matte finishes show dust in side light, and gloss finishes show fingerprints; both are handled by the same dry cloth.
Vacuum the intake grille every few weeks and keep fabric clear of it. The overheat cut-off protects the unit, not your evening. On a __KW__, the intake sits at the top of the body, where a curtain or a shelf can block it without anyone noticing.
Check the plug and cable once a year. A wall fire is often plugged in behind furniture, where a loose plug goes unnoticed for a decade.
What ownership looks like in year three
No fuel, no ash, no flue and no sweeping. The running cost is electricity and the maintenance is glass and dust.
The LED flame is rated for tens of thousands of hours, which is years of daily evening use. If an element fails inside the 12 month warranty we replace the unit rather than sending you a part and a diagram. That applies to every __KW__ we sell, whatever the size.
The finish is what ages. Matte black keeps its colour; pale and gloss finishes show the years. Cleaning with warm soapy water rather than abrasives is the whole secret, and it takes about a minute a month to keep a __KW__ looking new.
Returns run 30 days on unopened units. Keep the carton for a week after delivery and photograph the glass before you recycle the packaging.
Three mistakes to avoid
Buying for the room, not the wall. A __KW__ heats 400 to 600 square feet. Buy it for a bigger space and you will spend the winter disappointed by arithmetic rather than by the product.
Mounting it too high. Forty-eight inches to the centre is the height that works. Anything much above eye level turns a fire into a picture and puts the glow over people’s heads.
Sharing the circuit. At full heat these draw 12.5 amps. A kettle or a second heater on the same circuit will trip the breaker, and the fire will get the blame.
Flame-only in winter
If you later want heat in the same opening, an insert with a heater is the swap. Flame-only units cannot be upgraded with an element; the body has no heater cavity.
Where it works best
Bedrooms, dining rooms, hallways and second homes. Anywhere the fire is looked at rather than relied on, and anywhere the circuit is already busy.
Power draw
Under 30 watts with the flame at full brightness, which is less than a table lamp. Leaving it on all evening costs pennies.
Living with an electric fireplace insert with no heat
An electric fireplace insert with no heat is a fire for warm rooms, rented flats and summer evenings. It draws under 30 watts, which is less than a table lamp, and an electric fireplace insert with no heat adds no load to a busy circuit.
The flame is the whole product. An electric fireplace insert with no heat gives a room the focal point without pushing the temperature up, which is what most people actually want in July.
Who an electric fireplace insert with no heat suits
Warm climates, underfloor-heated houses and landlords who cannot add another 1,500W appliance. An electric fireplace insert with no heat fits all three.
Delivery, returns and the two things people ask about
Everything ships from our own yard, tracked, in 2 to 5 business days. Shipping is a flat $50 under $1,000 and free over $1,000, with a $150 minimum order. We will not promise a delivery window we cannot hold, and if a carrier loses a unit we replace it rather than sending you to a claims form.
Returns run 30 days on unopened units. Keep the carton for a week after delivery, because a transit scuff is far easier to resolve while the packaging still exists. Photograph the glass in daylight before you recycle anything.
Two questions come up on almost every order. The first is whether the heater can run without the flame, and it cannot: the flame is the light source for the fire and it stays on whenever heat is on. The second is whether the flame can run without the heater, and it can, all year, which is how most owners use these units from spring onwards.
How it compares to the rest of the range
For a larger open-plan wall, the 72 inch electric fireplace fills it properly. For a smaller room, the 50 inch version suits better than squeezing a 60 into a short wall.
The Ember Peak standard
Every fire we ship is bench-tested before it leaves the yard. We inspect the flame with the heater off, check the thermostat, and test the cord and plug, because a fireplace that arrives with a rattle is one you resent for years.
Delivery arrives tracked within 2 to 5 business days. Shipping is a flat $50 under $1,000 and free over $1,000, with a $150 minimum order. Anything unclear before or after the sale reaches a human on the contact page, and we will tell you when a different model suits your opening better.
Compare the full range on the electric fireplace inserts page, or read our sizing guide before you commit.
Common questions
Does it produce any heat?
No, the LEDs produce a negligible amount.
Can I add a heater later?
No, choose a heated insert instead.
Is it safe to leave on?
Yes, it draws less than a lamp.
What sizes?
30, 36 and 42 inch.
Does it need a flue?
No.
What sizes does it come in?
We stock it in 30 inch, 36 inch, 42 inch. All sizes share the same body height, so choosing one is a decision about width.
Does it include a remote and timer?
Yes. The box includes a remote, an adjustable thermostat, a 1–9 hour timer and the fixings.
If you are replacing an open fire or a gas fire that no longer works, this electric fireplace insert with no heat is the least disruptive route back to a working hearth. Nothing structural changes, nothing needs sweeping, and the whole job takes under an hour.
Every unit ships from our own yard rather than a third-party warehouse, which is why we can tell you honestly what fits your corner and what does not. We would rather talk you out of the wrong size than sell you one and post you a returns label.
Order the Larkin Flame Only Electric Fireplace Insert today. It ships in 2 to 5 business days with tracking, and orders over $1,000 ship free.
Reviews
There are no reviews yet.