Coloured ember lighting is either the best thing in the room or a fairground, and the difference is restraint. This unit gives you thirteen colours, a memory setting and the ability to turn the colour off entirely and run a warm fire.
Electric Fireplace With Led Lights at a Glance
- 13 ember bed colours with memory
- Independent flame brightness control
- Colour-off mode for a plain warm fire
- 5,200 BTU heater with thermostat
- Remote control and 1–9h timer
- Slim body, wall or recessed
Who it suits: a media wall, a games room or a modern living room where the fire is also part of the lighting scheme.
LED lighting that earns its place
The ember bed is lit independently of the flame, so you can run amber flame with a cool blue bed, or flood the whole thing in one colour, or switch the bed to plain warm white and forget the feature exists.
There is a memory function, which matters more than it sounds: a coloured fire that resets to red every time you switch it on becomes a nuisance within a week.
Under the glass sits the standard 5,200 BTU heater with a thermostat, so the lighting is the feature and the heating is the product.
Heating performance and room coverage
Heat comes from a 1,500W element rated at 5,200 BTU, on a standard 15 amp circuit. Outdoors, placement matters more than output: a unit aimed at the seating beats a bigger unit aimed at the sky.
In practice a electric fireplace with led lights holds 400 to 600 square feet comfortably, and helps in a room up to about 1,000 square feet when the doors are shut and the walls are insulated. Placement matters less than most buyers expect, provided the outlet is not blocked, and the thermostat does the rest of the work.
The flame runs independently of the heater. Turn the heat off and the fire becomes lighting, which is how most people use it for eight months of the year.
The most common mistake with a electric fireplace with led lights is buying it for the whole floor plan rather than the room you sit in. Match the unit to the room and the thermostat will cycle calmly instead of running flat out all evening.
Specifications and delivery
| Spec | Detail |
|---|---|
| Model | EP-WALL-CHROMA |
| Type | Wall-mounted fire with LED colour bed |
| Colours | 13, with memory |
| Flame | Independent brightness control |
| Heat output | 5,200 BTU / 1,500W |
| Controls | Remote, panel, thermostat, 1–9h timer |
| Depth | 4 inch |
| Mounting | Wall bracket or recessed |
| Clearance | 20cm above, 30cm below |
| Sizes | 42, 50 and 60 inch |
| Price | From $599 |
| Delivery | 2–5 business days, flat $50 under $1,000, free over $1,000 |
We check the flame, thermostat, cord and plug before dispatch, then ship it tracked.
Where it goes outdoors
Under a roof, facing the seating. That is the rule that decides whether an outdoor fire gets used or gets ruined. A pergola, a porch ceiling, a balcony above or a carport all count. Open sky does not.
Wind matters more than temperature. Place the unit so its outlet runs across the seating rather than into the prevailing breeze, and put a screen, a planter or a wall on the windward side if you can. A 5,200 BTU fire in a breeze loses most of its output.
Keep 20cm above and 30cm below the unit, and keep anything flammable clear. A __KW__ near a stack of cushions or a folded parasol is asking for trouble, and outdoors people store things in exactly those places.
Finally, site it near a weatherproof socket with an RCD or GFCI on the circuit. An extension lead across wet paving is the one genuine hazard in this category, and an outdoor socket costs less than the fire.
Running costs outdoors
Full heat draws 1.5 kWh an hour. At the US average of about 15 cents per kWh, that is roughly 22 to 23 cents an hour.
Compare that with a gas patio heater, where a 15kg cylinder lasts around ten hours and heats a radius whether or not anyone is sitting in it. Running one electric fire over one seating group is cheaper as well as more targeted.
Flame-only mode draws a few watts, so a summer evening of light costs pennies. Most owners run it that way from May to September and use the heat for the shoulder months only.
The Department of Energy explains how resistance heating is priced per kilowatt hour. Ten minutes there will save you guessing at running costs.
Installation without a trade
There is no flue, no gas and no vent, so a standard install needs no qualified fitter and no inspection afterwards.
- Measure both corner returns and check the unit clears every skirting board and window return before you unpack it.
- Move it into position with two people. Corner units are awkward rather than heavy, and one person will inevitably twist the frame trying to lift it alone.
- Level the feet against both walls. A corner out of square is normal; adjustable feet take up 12mm, which covers almost every room.
- Route the cord to the nearest outlet, keeping it behind the base rather than across the floor where it collects dust and gets kicked.
- Run the flame for ten minutes, then heat on low for five, then full output. If anything rattles at full heat, stop and call us.
The whole job takes about thirty minutes. If you are wall-mounting rather than placing a freestanding unit, add twenty minutes for the brackets.
Choosing the right size
We stock this electric fireplace with led lights in 42 inch, 50 inch, 60 inch. All options share the same body height, so the decision is about width rather than height.
Start from the wall. If the usable span is under 45 inches, choose a smaller body; a wide unit in a short wall crowds the doorway and looks wedged in rather than fitted.
Then look at the room. A 400 square foot room suits any size, while a 600 square foot open-plan space benefits from the wider option, because heat leaves a wider outlet and the flame fills more of the corner.
If you are between sizes, go up. Buyers who regret a corner fireplace almost always regret buying small.
Care and safety
Wipe the glass with a non-ammonia cleaner and a microfibre cloth, only when the unit is cool. Hot glass and cold cleaner is how crazing starts, and no polish fixes it afterwards. It is the only maintenance a __KW__ really needs.
Dust the frame monthly. Matte finishes show dust in side light, and gloss finishes show fingerprints; both are handled by the same dry cloth.
Vacuum the intake grille every few weeks and keep fabric clear of it. The overheat cut-off protects the unit, not your evening. On a __KW__, the intake sits at the top of the body, where a curtain or a shelf can block it without anyone noticing.
Check the plug and cable once a year. A wall fire is often plugged in behind furniture, where a loose plug goes unnoticed for a decade.
What ownership looks like in year three
No fuel, no ash, no flue and no sweeping. The running cost is electricity and the maintenance is glass and dust.
The LED flame is rated for tens of thousands of hours, which is years of daily evening use. If an element fails inside the 12 month warranty we replace the unit rather than sending you a part and a diagram. That applies to every __KW__ we sell, whatever the size.
The finish is what ages. Matte black keeps its colour; pale and gloss finishes show the years. Cleaning with warm soapy water rather than abrasives is the whole secret, and it takes about a minute a month to keep a __KW__ looking new.
Returns run 30 days on unopened units. Keep the carton for a week after delivery and photograph the glass before you recycle the packaging.
Three mistakes to avoid
Buying for the room, not the wall. A __KW__ heats 400 to 600 square feet. Buy it for a bigger space and you will spend the winter disappointed by arithmetic rather than by the product.
Mounting it too high. Forty-eight inches to the centre is the height that works. Anything much above eye level turns a fire into a picture and puts the glow over people’s heads.
Sharing the circuit. At full heat these draw 12.5 amps. A kettle or a second heater on the same circuit will trip the breaker, and the fire will get the blame.
Using colour without ruining the room
One colour, one room. A blue ember bed under a media wall at night looks deliberate; a rotating rainbow looks like a shop display. Set one colour and leave it.
The setting that most owners actually settle on is warm white with the flame at two-thirds brightness, which reads as a real fire with a modern edge.
Memory, remotes and daily use
The memory function holds your last colour and brightness when the fire is switched off at the remote. It does not hold them if the power is cut at the socket, so mount a switch you can reach and use that instead.
The remote covers colour, brightness, heat and timer. Keep it on a hook beside the fire; a coloured fire with the wrong setting is a daily irritation.
Where coloured lighting works
Media walls, games rooms, home cinemas and modern extensions. It does not work in a period sitting room with a timber mantel, where a coloured ember bed fights everything else in the room.
If you are unsure, buy it and leave the colour off. The plain warm setting is good enough that you will not regret the purchase either way.
Electric fireplace with LED lights in real rooms
An electric fireplace with LED lights is doing two jobs at once: it is a heater, and it is the lighting scheme for that wall. Thirteen ember colours and four flame settings are not gimmicks when the room has no other warm light source after dark.
Most owners run an electric fireplace with LED lights on a fixed amber setting for six months, then rediscover the colour options at parties. That is the honest pattern, and it is why we ship a remote rather than fussy buttons on the glass.
Who buys an electric fireplace with LED lights
It suits a media wall, a games room or a modern living room where the fire has to sit alongside a television. An electric fireplace with LED lights on a blue or violet setting reads as background when the screen is on; the amber setting takes over when it is off.
If your room is traditional, an electric fireplace with LED lights will still work on the warm end of the palette. If the walls are dark and the furniture is timber, choose the log bed rather than crystals and keep the colour on amber. That is the one setting where an electric fireplace with LED lights stops being a novelty and becomes the room light.
Delivery, returns and the two things people ask about
Everything ships from our own yard, tracked, in 2 to 5 business days. Shipping is a flat $50 under $1,000 and free over $1,000, with a $150 minimum order. We will not promise a delivery window we cannot hold, and if a carrier loses a unit we replace it rather than sending you to a claims form.
Returns run 30 days on unopened units. Keep the carton for a week after delivery, because a transit scuff is far easier to resolve while the packaging still exists. Photograph the glass in daylight before you recycle anything.
Two questions come up on almost every order. The first is whether the heater can run without the flame, and it cannot: the flame is the light source for the fire and it stays on whenever heat is on. The second is whether the flame can run without the heater, and it can, all year, which is how most owners use these units from spring onwards.
How it compares to the rest of the range
If you want a plain warm ember bed with colour as an option, the Ridgeline 60 is the simpler unit. For a deep crystal bed rather than coloured light, the Prism does that.
The Ember Peak standard
Every fire we ship is bench-tested before it leaves the yard. We inspect the flame with the heater off, check the thermostat, and test the cord and plug, because a fireplace that arrives with a rattle is one you resent for years.
Delivery arrives tracked within 2 to 5 business days. Shipping is a flat $50 under $1,000 and free over $1,000, with a $150 minimum order. Anything unclear before or after the sale reaches a human on the contact page, and we will tell you when a different model suits your wall better.
Compare the full range on the wall mounted electric fireplaces page, or read our sizing guide before you commit.
Common questions
Can I turn the colour off?
Yes, one setting gives a plain warm ember bed.
Does it remember my settings?
Yes, unless the power is cut at the socket.
How many colours?
Thirteen, plus a colour-cycling mode.
Is it bright enough to use as a light?
Yes at full brightness, and dimmable to a glow.
Does the colour affect the heater?
No, the heating is independent.
What sizes does it come in?
We stock it in 42 inch, 50 inch, 60 inch. All sizes share the same body height, so choosing one is a decision about width.
Does it include a remote and timer?
Yes. The box includes a remote, an adjustable thermostat, a 1–9 hour timer and the fixings.
If you are replacing an open fire or a gas fire that no longer works, this electric fireplace with led lights is the least disruptive route back to a working hearth. Nothing structural changes, nothing needs sweeping, and the whole job takes under an hour.
Every unit ships from our own yard rather than a third-party warehouse, which is why we can tell you honestly what fits your corner and what does not. We would rather talk you out of the wrong size than sell you one and post you a returns label.
Order the Chroma Electric Fireplace with LED Lights today. It ships in 2 to 5 business days with tracking, and orders over $1,000 ship free.
Reviews
There are no reviews yet.